REFERENCES   

ANDERSON, B. (2006) Conventions for U-value Calculations. 2006 Edition. BR 443:2006. Garston, Watford, UK, Building Research Establishment.

BELL, M. SMITH, M. and MILES-SHENTON, D. (2004) Condensation risk – impact of improvements to Part L and Robust Details on Part C. Interim Report Number 5 – Site survey descriptions and preliminary findings; A Report to the ODPM Building Regulations Division under the Building Operational Performance Framework. Project Reference Number CI 71/6/1 (BD2414), Leeds, UK, Leeds Metropolitan University.

BRE (2008) The Government’s Standard Assessment Procedure for Energy Rating of Dwellings. 2005 Edition, Revision 2. Garston, Watford, UK, Building Research Establishment.

BSI (1999), BS EN 13187: 1999 Thermal performance of buildings – Qualitative detection of thermal irregularities in building envelopes – Infrared method. London, British Standards Institution.

BSI (2001) BS EN ISO 10211-2:2001 Thermal Bridges in Building Construction – Calculation of Heat Flows and Surface Temperatures – Part 2: Linear Thermal Bridges. London, UK, British Standards Institution.

BSI (2003) BS EN ISO 10211-1:1996 Incorporating Corrigendum No. 1. Thermal Bridges in Building Construction – Calculation of Heat Flows and Surface Temperatures – Part 1: General Methods. London, UK, British Standards Institution.

BSI (2007) BS EN ISO 6946:2007 Building Components and Building Elements – Thermal Resistance and Thermal Transmittance – Calculation Method (ISO 6946:2007). London, UK, British Standards Institution.

BSRIA (2002), Technical NoteTN 9/2002: Thermal Imaging of Building Fabric - A best practice guide for continuous insulation. Bracknell, Berkshire, BSRIA [available for download from: www.bsria.co.uk/airtightness/?content=airtightness&service=free+information+to+download ]

ODPM (2006) Approved Document L1A: Conservation of Fuel and Power in New Dwellings. 2006 Edition, Office of the Deputy Prime Minister. London, NBS.

OVEREND, P. (2001) Thermal Bridging in Timber Framed Walls, BSc. Dissertation. Leeds, UK, Leeds Metropolitan University.

ROBERTS, D. BELL, M. and LOWE, R. (2004) Evaluating the Impact of an Enhanced Energy Performance Standard on Load-Bearing Masonry Domestic Construction – Report Number 2 – Design Process. PII Project CI 39/3/663, Leeds, Leeds Metropolitan University.

WARD, S. (2008) Heat Losses from Closed Panel Timber Systems, BSc. Dissertation. Leeds, UK, Leeds Metropolitan University.

WARD, T. I. (2006) Assessing the Effects of Thermal Bridging at Junctions and Around Openings. BRE IP 1/06. Garston, Watford, UK, Building Research Establishment.

WARD, T. and SAUNDERS, S. (2007) Conventions for Calculating Linear Thermal Transmittance and Temperature Factors. BR 497. Garston, Watford, UK, Building Research Establishment.