ATTMA (2007) Technical Standard 1. Measuring Air Permeability of Building Envelopes [Internet]. Airtightness Testing and Measurement Association. Issue 2, 13th July 2007. Available from: http://www.attma.org [Accessed 28th April 2008].
ALLEN, C. (1985) Leakage Distribution in Buildings. Technical Note AIC 16. Bracknell, UK, Air Infiltration Centre.
BORLAND, S. personal communication.
BRE (2005) The Government’s Standard Assessment Procedure for Energy Rating of Dwellings – 2005 Edition, Version 9.8. Garston, Watford, Building Research Establishment.
BRECSU (2000) Post-Construction Testing – A Professional’s Guide to Testing Housing for Energy Efficiency. General Information Report 64, Energy Efficiency Best Practice in Housing. London, HMSO.
BSI (2001) BS EN Standard 13829:2001 Thermal Performance of Buildings – Determination of air permeability of buildings – Fan pressurisation method. London, British Standards Institute.
BSI (1999), BS EN 13187: 1999 Thermal performance of buildings – Qualitative detection of thermal irregularities in building envelopes – Infrared method. London, British Standards Institution.
BSRIA (2002), Technical NoteTN 9/2002: Thermal Imaging of Building Fabric - A best practice guide for continuous insulation. Bracknell, Berkshire, BSRIA [available for download from www.bsria.co.uk/airtightness/?content=airtightness&service=free+information+to+download ]
CIBSE (2000) Testing Buildings for Air Leakage: CIBSE Technical Memoranda Tm23: 2000. London, The Chartered Institute of Building Services Engineers.
DEFRA (2001) Limiting Thermal Bridging and Air Leakage. Robust Construction Details for Dwellings and Similar Buildings. Department for the Environment, Food and Rural Affairs. London, TSO.
DTLR (2001) The Building Regulations 2000 Approved Document Part L1: Conservation of Fuel and Power in Dwellings. 2002 Edition. Department for Transport, Local Government and the Regions, London, HMSO.
ELMROTH, A. and LOGDBERG, A. (1980) Well Insulated Airtight Buildings, Energy Consumption, Indoor Climate, Ventilation and Air Infiltration.In Proceedings of the 8th CIB Congress, June 1980, Oslo, Norway, pp.23-27.
GRIGG, P. (2004) Assessment of Energy Efficiency Impact of Building Regulation Compliance. A Report Prepared for the Energy Savings Trust/Energy Efficiency Partnership for Homes. Client Report Number 219683, Garston, Watford, Building Research Establishment.
EST (2005) Improving Airtightness in Dwellings. Good Practice Guide 224 (GPG 224). London, Energy Saving Trust.
ESD (2003), Air Tight Buildings Case Studies: PII Project Website. Energy for Sustainable Development (ESD) Limited, Neston, Wiltshire. [http://airtightness.energyprojects.net – accessed 15-May-2007]
JAGGS, M. and SCIVYER, C. (2006), Good Building Guide GBG67 Part 1. Achieving Airtightness: General Principles. Garston, Watford, Building Research Establishment.
JOHNSTON, D. MILES-SHENTON, D. BELL, M and WINGFIELD, J. (2006) Airtightness of Buildings – Towards Higher Performance. Final Report – Domestic Sector Airtightness.. A Report to the ODPM Building Regulations Division Under the Building Operational Performance Framework. Project Reference Number CI 61/6/16 (BD2429). Leeds, Leeds Metropolitan University.
JOHNSTON, D. MILES-SHENTON, D. and BELL, M. (2006) Airtightness of Buildings – Towards Higher Performance. Discussion Paper Number 1 – Performance & Implementation. A Report to the ODPM Building Regulations Division Under the Building Operational Performance Framework. Project Reference Number CI 61/6/16(BD2429). Leeds, Leeds Metropolitan University.
JOHNSTON, D. and WINGFIELD, J. (2004), Air Leakage Test Results for St Nicholas Court (Fieldside Place) Development, York. Leeds Metropolitan University, Leeds, UK.
LIMB, M. J. (2001) A Review of International Ventilation, Airtightness, Thermal Insulation and Indoor Air Quality Criteria. Technical Note AIVC 55. Coventry, UK, Air Infiltration and Ventilation Centre.
LITVAK, A. GUILLOT, K. KILBERGER, M. and BOZE, D. (2000) Airtightness of French Dwellings - Results From Field Measurement Studies. In Proceedings of the 21st Air Infiltration and Ventilation Centre Conference. 26-29th September 2000, The Hague, Netherlands. Coventry, UK, AIVC.
LOWE, R.J., BELL, M. and ROBERTS, D. (2003), St. Nicholas Court Project - Final Report. Leeds Metropolitan University, Leeds, UK. [http://www.leedsmet.ac.uk/lsias/cebe/projects/stnicks/pdfs/report.pdf – accessed 05-Jun-07]
LOWE, R. JOHNSTON, D. & BELL, M. (1997) Airtightness in UK Dwellings: A Review of Some Recent Measurements. In Proceedings of the 2nd International Conference on Buildings and the Environment, 9-12th June 1997, Paris, France. Paris, CSTB, Volume 1, pp.389-396.
MILES-SHENTON, D., WINGFIELD, J. & BELL, M. (2007) Evaluating the Impact of an Enhanced Energy Performance Standard on Load-Bearing Masonry Construction – Interim Report Number 6 – Airtightness Monitoring, Qualitative Design and Construction Assessments, PII Project CI 39/3/663. Leeds, Leeds Metropolitan University.
ODPM (2006) The Building Regulations 2000 Approved Document Part F: Ventilation. 2006 Edition Office of the Deputy Prime Minister, London, HMSO.
ODPM (2006) Approved Document L1A: Conservation of Fuel and Power in New Dwellings. 2006 Edition, Office of the Deputy Prime Minister. London, NBS.
ODPM (2004) Proposals for Amending Part L of the Building Regulations and Implementing the Energy Performance of Buildings Directive: A Consultation Document. London, Office of the Deputy Prime Minister.
OLIVIER, D. (1999) Air Leakage Standards. Unpublished DTLR Report.
ORME, M. LIDDAMENT, M. and WILSON, A. (1998) Numerical Data for Air Infiltration & Natural Ventilation Calculations. Technical Note AIVC 44. Coventry, UK, Air Infiltration and Ventilation Centre.
SHERMAN, M. and DICKERHOFF, D. (undated) Air-tightness of US Dwellings. LBL-35700, Energy Performance of Buildings Group, California, USA, Lawrence Berkeley Laboratory.
SHERMAN, M. H. (2001) Airtightness of New Houses in the U.S: A Preliminary Report. In Proceedings of the 22nd Air Infiltration and Ventilation Centre Conference. 11-14th September 2001, Bath, UK. Brussels, Belgium, AIVC.
STEPHEN, R. K. (1998) Airtightness in UK Dwellings: BRE’s Test Results and Their Significance. BRE Report 359. Garston, Watford, Building Research Establishment.
STEPHEN, R. K. (2000) Airtightness in UK Dwellings. BRE Information Paper IP 1/00. Garston, Watford, Building Research Establishment.
SULATISKY, M. (1984) Airtightness Tests on 200 New Houses Across Canada: Summary of Results. Canada, Buildings Energy Technology Transfer Program.
UTLEY, J.I. and SHORROCK, L. D. (2006) Domestic Energy Fact File. Garston, Watford, Building Research Establishment.
WARREN, P. R. and WEBB, B. C. (1980) Ventilation Measurements in Housing. In Proceedings of the CIBS Symposium on Natural Ventilation by Design. December, 1980, London, CIBS, pp.22-34.
WINGFIELD, J. BELL, M. BELL, J. & LOWE, R. (2006) Evaluating the Impact of an Enhanced Energy Performance Standard on Load-Bearing Masonry Construction – Report Number 5 – Post-Construction Testing and Envelope Performancet – Lessons from Stamford Brook: Understanding the Gap between Designed and Real Performance, PII Project CI 39/3/663, Leeds, Leeds Metropolitan University.